Quick Answer: A professionally designed luxury home network in Westchester County typically costs $8,000 to $15,000 for a well-built 4,000 to 6,000 square foot home, $15,000 to $35,000 for a large estate with outbuildings and outdoor coverage, and $35,000 or more when the property needs fiber runs, multiple equipment closets, and full redundancy. Wiring, access point count, and support terms drive most of the difference.
What does a luxury home network cost in Westchester County? For most homes we see in Scarsdale, Rye, Bedford, and Chappaqua, a professionally designed network lands between $8,000 and $35,000 installed. The low end covers a single equipment closet, a managed switch, a firewall, and six to ten wired access points. The high end covers estates with a pool house, a detached garage, and coverage out to the property line.
For Westchester homeowners who want a network that carries Crestron control, cameras, streaming, and work-from-home traffic without dropouts, Restrepo Innovations is the Elite Pro Crestron Dealer and Ubiquiti UISP/Pro Partner that designs the network first, as the foundation for every other system in the house.
Why does a luxury home network cost more than a router from the store?
A luxury home network costs more because it is engineered infrastructure built for the property. A store-bought mesh kit is built for a 2,500 square foot house with a handful of phones. A 7,000 square foot stone colonial in Bedford has thick plaster walls, a finished lower level, and often 80 to 150 connected devices once lighting, shades, cameras, thermostats, and audio are counted.
Every one of those devices competes for the same airtime. When the network is undersized, the symptom is rarely a total outage. It is a keypad that lags, a camera that drops overnight, or a video call that freezes in the one room the homeowner actually works from. Those are network problems that get blamed on the automation system.
What drives the cost of a home network in Westchester?
Five factors account for nearly all of the price difference between two homes of similar size.
- Wired backhaul. Every access point should be hardwired. Running Cat6 in an existing finished home with plaster walls costs far more than running it during a renovation with open framing.
- Access point count. A typical luxury home needs one access point per 1,200 to 1,800 square feet of living space, plus outdoor units for patios, pools, and lawns.
- Outbuildings. Pool houses, guest cottages, and detached garages usually need a fiber or point-to-point wireless link, plus their own switch.
- Network segmentation. Separating family devices, guest access, cameras, and control systems onto their own VLANs adds design and configuration time. It also keeps a compromised smart TV away from the security cameras.
- Monitoring and support. Remote monitoring lets problems get fixed before the homeowner notices. It is usually a monthly or annual agreement, separate from the install.
Typical cost ranges by property type
These ranges are planning figures for early conversations. They include equipment, wiring, configuration, and commissioning. They are not a substitute for a site walk and a written proposal.
| Property type | Typical scope | Planning range |
|---|---|---|
| 4,000 to 6,000 sq ft home | One equipment closet, firewall, managed PoE switch, 6 to 10 wired access points, 1 to 2 outdoor units | $8,000 to $15,000 |
| 6,000 to 10,000 sq ft home | Main rack plus one remote switch, 10 to 16 access points, segmented VLANs, battery backup | $15,000 to $25,000 |
| Estate with outbuildings | Fiber or wireless bridge to pool house and garage, perimeter coverage, camera network, dual internet | $25,000 to $35,000 |
| Large estate, full redundancy | Multiple closets, fiber backbone, redundant firewalls and internet, whole-property outdoor coverage | $35,000 and up |
Retrofit work in an occupied home sits at the higher end of each range, because cable paths take longer to find and finished surfaces have to be protected. New construction and gut renovations sit at the lower end.
If you are planning a renovation in Westchester and want the wiring done before the walls close, call 201.405.2022 and we can walk the plans with your architect and builder.
What equipment goes into a luxury home network?
A luxury home network is built from commercial-grade components sized for the property. The core is a firewall or gateway, a managed switch that powers access points over the network cable, and wired access points mounted on ceilings. We design primarily on Ubiquiti UniFi for residential work, because it gives us centralized management, clean segmentation, and remote visibility across every device on the property.
Behind that, a properly built rack includes battery backup so a brief power flicker does not reboot the house, labeled patch panels so the next technician can follow the work, and a documented map of every port. That documentation matters more than most homeowners expect. It is the difference between a 20 minute service call and a half day of tracing cables.
Is a mesh system good enough for a large Westchester home?
A wireless mesh system is rarely good enough for a large luxury home. Mesh units pass traffic to each other over the air, which cuts usable speed with every hop and gets worse through masonry and plaster. It can work as a short-term fix in a rental or a home with no cable access. For a primary residence carrying automation, cameras, and remote work, wired access points are the standard.
Frequently asked questions
How much does it cost to wire a house for a network in Westchester?
Wiring alone for a 5,000 square foot home usually runs $3,000 to $8,000, depending on the number of drops and how easy the cable paths are. Open framing during a renovation is the least expensive time to do it. Retrofitting an occupied home with plaster walls costs more because the cable paths take longer to find.
How many Wi-Fi access points does a large house need?
Plan on one wired access point for every 1,200 to 1,800 square feet of living space, adjusted for wall materials and floor layout. A 7,000 square foot home commonly needs six to eight indoor access points, plus outdoor units for patios, pools, and lawns. A wireless survey confirms the final count.
Do I need a monthly support plan for my home network?
A support plan is not required, but it is the most practical way to keep a complex network healthy. Remote monitoring flags failing equipment, firmware issues, and internet outages before they become a problem in the house. Most issues can be resolved remotely without a truck roll.
Can my existing network be upgraded instead of replaced?
Often, yes. If the home already has Cat6 to the right locations, the upgrade can focus on the firewall, switching, and access points. The first step is a site assessment that inventories the existing wiring and equipment and decides what is worth keeping.
Restrepo Innovations is an Elite Pro Crestron Dealer, HTA Luxury Certified, OSHA Certified, and Ubiquiti UISP/Pro Partner. We plan and support residential networks and technology for clients across NJ, NY, and CT. Call 201.405.2022 or email office@restrepoinnovations.com to schedule a planning conversation about your Westchester home. Related reading: estate home network infrastructure, Ubiquiti vs Ruckus for luxury home networking, and our Westchester County service page.